Safe Manning Application
The Norwegian Maritime Authority issues Safe Manning Certificates to new vessels and to existing vessels if the company has made changes and requests a new manning assessment, or due to required changes.
A preliminary assessment may be carried out for:
- a vessel at the design stage
- a vessel undergoing conversion
- a foreign vessel to be transferred to the Norwegian flag
The preliminary assessment is provided by e-mail, and no Safe Manning Certificate is issued. It serves only as an indication of the likely minimum safe manning and is not binding.
The company shall use the following forms when applying for a Safe Manning Certificate:
- KS-0308 Application for Safe Manning on a Norwegian Vessel
- KS-0308-1 Checklist for Manning Certificate Application
When completing the inspection form (page 4), documented input from the master and the employee representative body shall be included, cf. the Manning Regulations 2009, Section 4, first paragraph, letter (b). - KS-0308-2 Declaration concerning Application for Operation with Periodically Unmanned Engine Room (UMS) for Non-Classed Vessels
Completed forms shall be submitted as attachments to: post@sdir.no
Update/change to an existing Safe Manning Certificate
If vessel information is changed without affecting the size or composition of the safe manning, the above-mentioned forms do not need to be used.
This may include changes such as:
- name of the vessel
- port of registry
- transfer between NIS and NOR
- minor corrections in gross tonnage or length
- minor corrections to propulsion power
- changes in STCW qualification requirements
In such cases, please send an email with the requested update/amendment and include the following information:
- vessel name, call sign and IMO number
- copy of the current Safe Manning Certificate
General note regarding certificate requirements
Certificate requirements stated on the Safe Manning Certificate refer to national certification codes, with the STCW reference in brackets. Other certificates may be accepted if they confer adequate capacity for the relevant position. For rights or restrictions, see each individual certificate’s section of limitations.
Qualification requirements for Master
On ships up with gross tonnage up to 3000, the qualification requirement for the Master is set to be Certificate of Competency Deck Officer Class 1 (D1, STCW II/2), cf. Regulations No. 1523 on qualifications and certificates for seafarers (Regulations on qualifications), Section 28 (1).
A holder of a Certificate of Competency Deck Officer Class 3 (D3) may nevertheless serve as Master on vessels up to 3000 gross tonnage, provided the holder have turned 20 years and has completed at least 36 months of seagoing service as officer in charge of a navigational watch on seagoing ships of 500 gross tonnage or more. The required seagoing service may be reduced to 24 months if at least 12 months were served as Chief Officer on vessels of 500 gross tonnage or more, cf. Regulations on qualifications, Section 26 (3).
Qualification requirements for Chief Engineer
On vessels with propulsion power of 3000 kW or less, the qualification requirement for the Chief Engineer is set to be Certificate of Competency Engineer Officer Class 1 (M1, STCW III/2)), cf. Regulations No. 1523 on qualifications and certificates for seafarers (Regulations on qualifications), Section 41 (1).
A holder of a Certificate of Competency Engineer Officer Class 3 (M3) may nevertheless serve as Chief Engineer on vessels with propulsion power up to 3000 kW, provided the holder has completed at least 24 months of seagoing service as an engineer officer, cf. Regulations on qualifications, Section 39 (2).
Issuance of Safe Manning Certificate following changes to the Ship's Registry
In the event of a change of registry between NOR and NIS, a change of vessel name, or registration of a vessel that has previously been registered in NOR or NIS, we regret that we are unable to issue an electronic Safe Manning Certificate until the relevant registration or change has been completed.
The shipping company must submit an application to post@sdir.no to inform the Norwegian Maritime Authority of the planned registration or change. Notification to the Norwegian Ship Registers is not sufficient.
The shipping company must also inform us as soon as possible if the planned date for the registration or change is amended.
The Safe Manning Certificate will be issued as soon as possible after the registration or change has been completed.
Change of ISM responsible/managing company
If the ISM responsible or managing company is changed, a complete application must be submitted.
If the vessel is transferred within the same company, it may be assessed case by case whether a complete application is required.
Gross Tonnage
Gross tonnage as stated on the Safe Manning Certificate refers to gross tonnage according to the International Convention on Tonnage Measurement of Ships, 1969.
Electronic Safe Manning Certificates
We now issue electronic safe manning certificates. The certificate is available in the online portal My Vessels.
Open My Vessels
The safe manning certificate must be printed and posted on board in such a manner that all persons on board can familiarize themselves with its contents, cf. Regulations on Manning of Norwegian Ships, Section 10.