Skip to main content

Use of safety glasses – lessons learned

Using the correct personal protective equipment (PPE) for the task at hand should always form part of procedures, checklists, Safe Job Analyses (SJAs) and risk assessments.

If you are gutting fish on deck or in the processing area on board a fishing vessel, you should wear safety glasses. Safety glasses should also be worn when carrying out painting work and other tasks that may pose a risk of eye injury. The need for eye protection should always be assessed before work begins, to minimise the risk of eye injuries.

There are many types of safety glasses available for different tasks. Where there is a risk of splashes from hazardous liquids, or of dust or particles being projected from equipment such as angle grinders, safety glasses with side protection must be worn. Measures to reduce the risk of eye injuries should always be considered when planning and carrying out work. Selecting the correct type of safety glasses is one such measure. Safety glasses that are worn, damaged, impair vision or make it difficult to work safely should be replaced.

Incidents

We regularly receive accident reports involving people who have sustained eye injuries while working in the processing areas of fishing vessels without wearing safety glasses.

In one incident, a fisherman was standing next to a colleague who was gutting fish. The colleague punctured the gall bladder of a fish, causing bile to splash into the fisherman's eye. The fisherman was not wearing safety glasses. Fortunately, no serious injury occurred. However, such incidents can, in the worst case, cause serious damage to the eye. We have received feedback indicating that some fishermen who gut fish are reluctant to wear safety glasses. Nevertheless, we strongly encourage everyone to wear the appropriate PPE at all times to prevent injuries and permanent eye damage.

In another incident, a deckhand was carrying out painting work. He had removed his safety glasses and was putting the lid back on a paint container when paint hardener splashed into his eye. The deckhand immediately went to the changing room and thoroughly rinsed his eye with eyewash solution. After approximately 15 minutes of rinsing, in accordance with the instructions in the safety data sheet, he was taken to a medical clinic for further examination.

Following the medical examination, the deckhand returned to the vessel. However, as his condition did not improve during the evening, it was decided that he should seek further medical treatment. Safety glasses and other PPE must not be removed too soon. They should only be removed once the task has been fully completed.

Advice

The best way to ensure that PPE is used is to make sure it is practical and comfortable for the user. Safety glasses should be comfortable to wear and easy to put on and take off.

The lenses should be easy to clean and resistant to scratching during normal cleaning and use.

We regularly publish articles on a range of topics, including the use of PPE, as part of our “Lessons learned” series. By sharing real-life incidents, we aim to highlight the importance of using the correct protective equipment.

PPE is not worn solely to comply with requirements. It is there to protect your health and help ensure that you return home safely at the end of the working day.

Useful links