Skip to main content

Safe operation of lifting appliances

In recent years, the Norwegian Maritime Authority (NMA) has received several reports of serious accidents related to lifting operations on board fishing vessels. The accidents have resulted in several crush injuries and, in two cases, lives have been lost.

Measures

To prevent serious accidents when using lifting appliances, the NMA encourages shipping companies to review their procedures and routines for the safe operation of lifting applicances.

It is particularly recommended to consider or reassess the following points:

  • Conduct thorough risk assessments of lifting operations
  • Install limit switches to prevent crush injuries
  • Ensure adequate training of crane operators
  • Mark a safe zone for the operation of lifting appliances

Legislation

  • Regulations of 1 January 2005 No. 8 on the working environment, health and safety of persons working on board ship – section 2-2 on  risk assessment and section 2-6 on training
  • Regulations of 16 December 2016 No. 1770 on safety management for small cargo ships, passenger ships and fishing vessels, etc. – section 5 training and section 6 on risk assessment
  • Regulations of 5 September 2014 No. 1191 on a safety management system for Norwegian ships and mobile offshore units – section 2, cf. Part A point 6 of the ISM Code on training and point 7 on risk assessment
  • Regulations of 17 January 1978 No. 4 on cargo-handling appliances on ships – section 12 (1) on limit switches
  • Regulations of 13 January 1986 No. 31 on cranes used on ships in open waters for loading and unloading – section 5 (1) on limit switches