Skip to main content

Semi-finished products sold before 2006 and completed by an amateur

CE marking of leisure boats built up from semi-finished products.

The NMA is responsible for the Recreational Craft Regulations of 2004 no. 1820, and their enforcement. The regulation implements the EU Council Directive 1994/25EC as amended by 2003/44EC.

Until June 2005, the NMA has followed a practice where it has been accepted that semi-finished products that are completed by an amateur for their own use do not need to be CE marked before they are put into use.

Furthermore, it has been assumed that semi-finished products must be accompanied by a declaration in accordance with Annex 3 of the Regulations. A declaration pursuant to Appendix 3 is required because it is a professional actor who has made the semi-finished product available on the market

Change in interpretation of the Directive - requirements for CE marking

At the 14th RCD ADCO meeting in May 2005, it was clarified that semi-finished products of the type "sail-aways" or sealed boats that are taken home on keels for completion must be CE marked by the supplier, i.e. that they cannot be defined as self-builds. This is justified by the fact that a delivery is taking place from a professional and that the vessel can be sailed.

Vessels that can be sailed must satisfy all relevant requirements and must be CE marked by the supplier before sailing. At the same time, the chairman of the commission expressed the view that a self-built boat had to be defined as a vessel built by the owner/user based on raw materials, i.e. from scratch. The authorities supported this interpretation.

The consequence is that semi-finished products can no longer be considered self-built boats that fall under the 5-year rule.

Semi-finished products purchased before 1 January 2006

In line with the outcome of the ADCO meeting in May 2005, the NMA has changed its practice so that semi-finished products that are completed by amateurs for their own use must now be CE marked before use. However, there has been a perception among some private individuals and in the industry that semi-finished products completed by the owner/user could fall under the 5-year rule and be exempt from the requirement for CE marking.

The NMA has assessed the situation and concluded that the change and possible misinterpretations will not be subject to prosecution by the NMA as the supervisory authority.

The condition is that the completion of the semi-finished product has been delivered to the "self-builder" before 1 January 2006 and that there is a declaration from the supplier of the semi-finished product in accordance with Appendix 3 of the Regulations. This decision has been made in consultation with the Swedish Maritime Administration. The timing has been assessed on the basis of the transitional provision in the new Recreational Craft Regulations of 2004, cf. section 14 third paragraph, as the old Regulations are somewhat unclear in relation to the new ones.

The cut-off point for exemption according to Art. The changed practice is set to the time when the supplier has handed over the semi-finished product and invoiced for the delivery, i.e. the date on which the invoice was issued.

In view of the timing of this announcement, the NMA will consider accepting that semi-finished products intended for completion by amateurs, which have been invoiced by 26.1.2006, may fall under the exemption for self-builds. Exemption from CE marking is granted provided that the vessel is not transferred within a 5-year period.